Key issues fixed:
- Progress dialog showing up as white/hanging/getting stuck/unresponsive.
Key changes:
- Progress dialog now shows progress as a function of all files instead of per nca within a file.
- Overwrite existing files will overwrite all files in the selection.
* Switch game settings to use a pointer
In order to add full per-game settings, we need to be able to tell yuzu to switch
to using either the global or game configuration. Using a pointer makes it easier
to switch.
* configuration: add new UI without changing existing funcitonality
The new UI also adds General, System, Graphics, Advanced Graphics,
and Audio tabs, but as yet they do nothing. This commit keeps yuzu
to the same functionality as originally branched.
* configuration: Rename files
These weren't included in the last commit. Now they are.
* configuration: setup global configuration checkbox
Global config checkbox now enables/disables the appropriate tabs in the game
properties dialog. The use global configuration setting is now saved to the
config, defaulting to true. This also addresses some changes requested in the PR.
* configuration: swap to per-game config memory for properties dialog
Does not set memory going in-game. Swaps to game values when opening the
properties dialog, then swaps back when closing it. Uses a `memcpy` to swap.
Also implements saving config files, limited to certain groups of configurations
so as to not risk setting unsafe configurations.
* configuration: change config interfaces to use config-specific pointers
When a game is booted, we need to be able to open the configuration dialogs
without changing the settings pointer in the game's emualtion. A new pointer
specific to just the configuration dialogs can be used to separate changes
to just those config dialogs without affecting the emulation.
* configuration: boot a game using per-game settings
Swaps values where needed to boot a game.
* configuration: user correct config during emulation
Creates a new pointer specifically for modifying the configuration while
emulation is in progress. Both the regular configuration dialog and the game
properties dialog now use the pointer Settings::config_values to focus edits to
the correct struct.
* settings: split Settings::values into two different structs
By splitting the settings into two mutually exclusive structs, it becomes easier,
as a developer, to determine how to use the Settings structs after per-game
configurations is merged. Other benefits include only duplicating the required
settings in memory.
* settings: move use_docked_mode to Controls group
`use_docked_mode` is set in the input settings and cannot be accessed from the
system settings. Grouping it with system settings causes it to be saved with
per-game settings, which may make transferring configs more difficult later on,
especially since docked mode cannot be set from within the game properties
dialog.
* configuration: Fix the other yuzu executables and a regression
In main.cpp, we have to get the title ID before the ROM is loaded, else the
renderer will reflect only the global settings and now the user's game specific
settings.
* settings: use a template to duplicate memory for each setting
Replaces the type of each variable in the Settings::Values struct with a new
class that allows basic data reading and writing. The new struct
Settings::Setting duplicates the data in memory and can manage global overrides
per each setting.
* configuration: correct add-ons config and swap settings when apropriate
Any add-ons interaction happens directly through the global values struct.
Swapping bewteen structs now also includes copying the necessary global configs
that cannot be changed nor saved in per-game settings. General and System config
menus now update based on whether it is viewing the global or per-game settings.
* settings: restore old values struct
No longer needed with the Settings::Setting class template.
* configuration: implement hierarchical game properties dialog
This sets the apropriate global or local data in each setting.
* clang format
* clang format take 2
can the docker container save this?
* address comments and style issues
* config: read and write settings with global awareness
Adds new functions to read and write settings while keeping the global state in
focus. Files now generated per-game are much smaller since often they only need
address the global state.
* settings: restore global state when necessary
Upon closing a game or the game properties dialog, we need to restore all global
settings to the original global state so that we can properly open the
configuration dialog or boot a different game.
* configuration: guard setting values incorrectly
This disables setting values while a game is running if the setting is
overwritten by a per game setting.
* config: don't write local settings in the global config
Simple guards to prevent writing the wrong settings in the wrong files.
* configuration: add comments, assume less, and clang format
No longer assumes that a disabled UI element means the global state is turned
off, instead opting to directly answer that question. Still however assumes a
game is running if it is in that state.
* configuration: fix a logic error
Should not be negated
* restore settings' global state regardless of accept/cancel
Fixes loading a properties dialog and causing the global config dialog to show
local settings.
* fix more logic errors
Fixed the frame limit would set the global setting from the game properties
dialog. Also strengthened the Settings::Setting member variables and simplified
the logic in config reading (ReadSettingGlobal).
* fix another logic error
In my efforts to guard RestoreGlobalState, I accidentally negated the IsPowered
condition.
* configure_audio: set toggle_stretched_audio to tristate
* fixed custom rtc and rng seed overwriting the global value
* clang format
* rebased
* clang format take 4
* address my own review
Basically revert unintended changes
* settings: literal instead of casting
"No need to cast, use 1U instead"
Thanks, Morph!
Co-authored-by: Morph <39850852+Morph1984@users.noreply.github.com>
* Revert "settings: literal instead of casting
"
This reverts commit 95e992a87c898f3e882ffdb415bb0ef9f80f613f.
* main: fix status buttons reporting wrong settings after stop emulation
* settings: Log UseDockedMode in the Controls group
This should have happened when use_docked_mode was moved over to the controls group
internally. This just reflects this in the log.
* main: load settings if the file has a title id
In other words, don't exit if the loader has trouble getting a title id.
* use a zero
* settings: initalize resolution factor with constructor instead of casting
* Revert "settings: initalize resolution factor with constructor instead of casting"
This reverts commit 54c35ecb46a29953842614620f9b7de1aa9d5dc8.
* configure_graphics: guard device selector when Vulkan is global
Prevents the user from editing the device selector if Vulkan is the global
renderer backend. Also resets the vulkan_device variable when the users
switches back-and-forth between global and Vulkan.
* address reviewer concerns
Changes function variables to const wherever they don't need to be changed. Sets Settings::Setting to final as it should not be inherited from. Sets ConfigurationShared::use_global_text to static.
Co-Authored-By: VolcaEM <volcaem@users.noreply.github.com>
* main: load per-game settings after LoadROM
This prevents `Restart Emulation` from restoring the global settings *after* the per-game settings were applied. Thanks to BSoDGamingYT for finding this bug.
* Revert "main: load per-game settings after LoadROM"
This reverts commit 9d0d48c52d2dcf3bfb1806cc8fa7d5a271a8a804.
* main: only restore global settings when necessary
Loading the per-game settings cannot happen after the ROM is loaded, so we have to specify when to restore the global state. Again thanks to BSoD for finding the bug.
* configuration_shared: address reviewer concerns except operator overrides
Dropping operator override usage in next commit.
Co-Authored-By: LC <lioncash@users.noreply.github.com>
* settings: Drop operator overrides from Setting template
Requires using GetValue and SetValue explicitly. Also reverts a change that broke title ID formatting in the game properties dialog.
* complete rebase
* configuration_shared: translate "Use global configuration"
Uses ConfigurePerGame to do so, since its usage, at least as of now, corresponds with ConfigurationShared.
* configure_per_game: address reviewer concern
As far as I understand, it prevents the program from unnecessarily copying strings.
Co-Authored-By: LC <lioncash@users.noreply.github.com>
Co-authored-by: Morph <39850852+Morph1984@users.noreply.github.com>
Co-authored-by: VolcaEM <volcaem@users.noreply.github.com>
Co-authored-by: LC <lioncash@users.noreply.github.com>
Previously, we were reading the keys everytime a KeyManager object was created, causing yuzu to reread the keys file multiple hundreds of times when loading the game list.
With this change, it is only loaded once.
On my system, this decreased game list loading times by a factor of 20.
Patch the RomFS with the selected updates before dumping. Previously the resulting RomFS only contained data from the original title.
To dump the RomFS without updates the user can disable the update under Properties before choosing Dump RomFS.
Allows reporting more cases where logic errors may exist, such as
implicit fallthrough cases, etc.
We currently ignore unused parameters, since we currently have many
cases where this is intentional (virtual interfaces).
While we're at it, we can also tidy up any existing code that causes
warnings. This also uncovered a few bugs as well.
Makes popup texts more compact and clear and also links our quickstart guide now.
Also removes OnMenuSelectEmulatedDirectory from the File dropdown, as the action already exists in the Filesystem tab and provides better visual feedback there.
Changes the GraphicsContext to be managed by the GPU core. This
eliminates the need for the frontends to fool around with tricky
MakeCurrent/DoneCurrent calls that are dependent on the settings (such
as async gpu option).
This also refactors out the need to use QWidget::fromWindowContainer as
that caused issues with focus and input handling. Now we use a regular
QWidget and just access the native windowHandle() directly.
Another change is removing the debug tool setting in FrameMailbox.
Instead of trying to block the frontend until a new frame is ready, the
core will now take over presentation and draw directly to the window if
the renderer detects that its hooked by NSight or RenderDoc
Lastly, since it was in the way, I removed ScopeAcquireWindowContext and
replaced it with a simple subclass in GraphicsContext that achieves the
same result
This removes the "exit lock" popup from yuzu when pausing a game.
Motivation
The exit lock feature is broken in many ways and doesn't work properly in a lot of games, causing it to appear every time you want to pause the game or stop it, even in places where it wouldn't on Switch.
Additionally, the feature of pausing a game doesn't exist like this on Switch and yuzu should be guaranteed to be deterministic anyway, so pausing the emulation shouldn't be able to interrupt any critical processes in any way.
Emulates negative y viewports with ARB_clip_control. This allows us to
more easily emulated pipelines with tessellation and/or geometry shader
stages. It also avoids corrupting games with transform feedbacks and
negative viewports (gl_Position.y was being modified).
We can simply enable CMAKE_AUTOUIC and let CMake take care of handling
the UI code generation for targets.
As part of letting CMake automatically handle the header file parsing,
we must not name includes with "ui_*" unless they're related to the
output of the Qt UIC compiler. Because of this, we need to rename
ui_settings, given it would conflict with this restriction.
Previously, a translated string was being appended onto another string
in a manner that doesn't allow the translator to control where the
appended text is placed. This can be a nuisance for languages where
grammar and text ordering differs from English.
We now append the strings via the format strings themselves, which
allows translators to reorder where the text will be placed.
Qt uses a signed value to represent indices. We should follow this
convention where applicable to avoid unnecessary sign-conversion
warnings, as well as making it easier to interoperate with other aspects
of Qt.
While we're at it, we can also make a sign-conversion explicit.
For similar reasons to the previous change, we move this to a single
function, so we don't need to duplicate the conversion logic in several
places within main.cpp.
This doesn't actually work anymore, and given how long it's been left in
that state, it's unlikely anyone actually seriously used it.
Generally it's preferable to use RenderDoc or Nsight to view surfaces.
Rather than scream that the file doesn't exist, we can clearly state
what specifically doesn't exist, to avoid ambiguity, and make it easier
to understand for non-primary English speakers/readers.
In these cases the system object is nearby, and in the other, the
long-form of accessing the telemetry instance is already used, so we can
get rid of the use of the global accessor.
MSVC does not seem to like using constexpr values in a lambda that were declared outside of it.
Previously on MSVC build the hotkeys to inc-/decrease the speed limit were not working correctly because in the lambda the SPEED_LIMIT_STEP had garbage values.
After googling around a bit I found: https://github.com/codeplaysoftware/computecpp-sdk/issues/95 which seems to be a similar issue.
Trying the suggested fix to make the variable static constexpr also fixes the bug here.
With shader caches on the horizon, one requirement is to provide visible
feedback for the progress. The shader cache reportedly takes several
minutes to load for large caches that were invalidated, and as such we
should provide a loading screen with progress.
Adds a loading screen widget that will be shown until the first frame of
the game is swapped. This was chosen in case shader caches are not being
used, several games still take more than a few seconds to launch and
could benefit from a loading screen.
This allows us to present a much nicer UI to the user over a simple combo box and is made easy with the modular nature of the profile-selection applet frontend.
Using the QtProfileSelectorDialog, this implementation is trivial. This mimics the real switch behavior of asking which user on every game boot, but it is default disabled as that might get inconvenient.
Allows capturing screenshot at the current internal resolution (native for software renderer), but a setting is available to capture it in other resolutions. The screenshot is saved to a single PNG in the current layout.
We can just return a new instance of this when it's requested. This only
ever holds pointers to the existing registed caches, so it's not a large
object. Plus, this also gets rid of the need to keep around a separate
member function just to properly clear out the union.
Gets rid of one of five globals in the filesystem code.
These parameters don't need to utilize a shared lifecycle directly in
the interface. Instead, the caller should provide a regular reference
for the function to use. This also allows the type system to flag
attempts to pass nullptr and makes it more generic, since it can now be
used in contexts where a shared_ptr isn't being used (in other words, we
don't constrain the usage of the interface to a particular mode of
memory management).
* get rid of boost::optional
* Remove optional references
* Use std::reference_wrapper for optional references
* Fix clang format
* Fix clang format part 2
* Adressed feedback
* Fix clang format and MacOS build
* Fixed conflict with nfp
* Few fixups for nfc
* Conflict 2
* Fixed AttachAvailabilityChangeEvent
* Conflict 3
* Fixed byte padding
* Refactored amiibo to not reside in "System"
* Removed remaining references of nfc from system
* used enum for Nfc GetStateOld
* Added missing newline
* Moved file operations to front end
* Conflict 4
* Amiibos now use structs and added mutexes
* Removed amiibo_path
Neither of these functions alter the ownership of the provided pointer,
so we can simply make the parameters a reference rather than a direct
shared pointer alias. This way we also disallow passing incorrect memory values like
nullptr.
We can utilize QStringList's join() function to perform all of the
appending in a single function call.
While we're at it, make the extension list a single translatable string
and add a disambiguation comment to explain to translators what %1
actually is.
Depending on whether or not USE_DISCORD_PRESENCE is defined, the "state"
parameter can be used or unused. If USE_DISCORD_PRESENCE is not defined,
the parameter will be considered unused, which can lead to compiler
warnings. So, we can explicitly mark it with [[maybe_unused]] to inform
the compiler that this is intentional.
Makes the public interface consistent in terms of how accesses are done
on a process object. It also makes it slightly nicer to reason about the
logic of the process class, as we don't want to expose everything to
external code.
Ternary operators have a lower precedence than arithmetic operators, so
what was actually occurring here is "return (out + full) ? x : y" which most
definitely isn't intended, given we calculate out recursively above. We
were essentially doing a lot of work for nothing.
This can cause warnings about static constructors, and is also not ideal
performance-wise due to the indirection through std::function. This also
keeps the behavior itself separate from the surrounding code, which can
make it nicer to read, due to the size of the code.
It allows us to use texture views and it reduces the overhead within the GPU driver.
But it disallows us to reallocate the texture, but we don't do so anyways.
In the end, it is the new way to allocate textures, so there is no need to use the old way.
Lets us keep the generic portions of the compatibility list code
together, and allows us to introduce a type alias that makes it so we
don't need to type out a very long type declaration anymore, making the
immediate readability of some code better.
Eliminates the need to rebuild some source files if the file_util header
ever changes. This also uncovered some indirect inclusions, which have
also been fixed.
