Currently yuzu will read the mapping but does not connect a controller
despite adding subsequent configurations for it. Read the `connected`
setting for now as a boolean like the Qt frontend.
It was just the one in emu_window_sdl2, but since _gl and _vk inherit
from it, they all needed adjustments.
Leaves just the one auto system& in main().
Use VK_KHR_pipeline_executable_properties when enabled and available to
log statistics about the pipeline cache in a game.
For example, this is on Turing GPUs when generating a pipeline cache
from Super Smash Bros. Ultimate:
Average pipeline statistics
==========================================
Code size: 6433.167
Register count: 32.939
More advanced results could be presented, at the moment it's just an
average of all 3D and compute pipelines.
This setting is best referred to as a speed limit, as it involves the limits of all timing based aspects of the emulator, not only framerate.
This allows us to differentiate it from the fps unlocker setting.
GLASM is getting good enough that we can move it out of advanced
graphics settings. This removes the setting `use_assembly_shaders`,
opting for a enum class `shader_backend`. This comes with the benefits
that it is extensible for additional shader backends besides GLSL and
GLASM, and this will work better with a QComboBox.
Qt removes the related assembly shader setting from the Advanced
Graphics section and places it as a new QComboBox in the API Settings
group. This will replace the Vulkan device selector when OpenGL is
selected.
Additionally, mark all of the custom anisotropic filtering settings as
"WILL BREAK THINGS", as that is the case with a select few games.
Reverts 48259de0c1a6a1aca77eec31cb8aca5ca2b680dd to the previous
hierarchy and fixes the resolution issue with this fullscreen mode.
yuzu-cmd will now read the fullscreen_mode setting and use it
appropriately.
* emu_window_sdl2_vk: Use the generated SDL config
On Linux, due to the way we include SDL2 as a submodule, it makes it
difficult for us to specify which SDL_config.h we intended to include.
Before, CMake would default to the dummy one included with SDL and
ignore the generated one.
This tells CMake to use the generated one. In addition, we define
USING_GENERATED_CONFIG_H to throw an error in case the dummy config is
used by accident. Fixes Vulkan not working on Linux yuzu-cmd.
* emu_window_sdl2_vk: Specify the window manager if it should be supported
The original language "not implemented" is wrong if the implementation
exists but is not compiled. This causes a bit of a debugging headache
when it goes wrong. Log it if the window manager is known before
exiting.
* sdl_impl, emu_window: Remove clang ignore
Fixed upstream by
libsdl-org/SDL@25fc40b0bd
* Enable fullscreen support for Vulkan on yuzu-cmd
Hooked up the existing SDL2 logic for fullscreen support in the Vulkan window of yuzu-cmd.
* Change fullscreen logic to attempt desktop resolution first on yuzu-cmd
Changed the order in which we attempt to switch to fullscreen. First try desktop resolution first, if it fails fall back to streched fullscreen using windowed resolution.
Co-authored-by: lat9nq <22451773+lat9nq@users.noreply.github.com>
Co-authored-by: san <san+gitkraken@smederijmerlijn.nl>
The original language "not implemented" is wrong if the implementation
exists but is not compiled. This causes a bit of a debugging headache
when it goes wrong. Log it if the window manager is known before
exiting.
On Linux, due to the way we include SDL2 as a submodule, it makes it
difficult for us to specify which SDL_config.h we intended to include.
Before, CMake would default to the dummy one included with SDL and
ignore the generated one.
This tells CMake to use the generated one. In addition, we define
USING_GENERATED_CONFIG_H to throw an error in case the dummy config is
used by accident. Fixes Vulkan not working on Linux yuzu-cmd.
Many settings in common/settings.h are missing from yuzu-cmd, either
they were added to default_ini.h but not read in, or vice versa, or the
setting was altogether omitted from yuzu-cmd. Some defaults were
reported wrong, so those were fixed where noticed.
Creates a new BasicSettings class in common/settings, and forces setting
a default and label for each setting that uses it in common/settings.
Moves defaults and labels from both frontends into common settings.
Creates a helper function in each frontend to facillitate reading the
settings now with the new default and label properties.
Settings::Setting is also now a subclass of Settings::BasicSetting. Also
adds documentation for both Setting and BasicSetting.
Use its std::stop_token to abort shader cache loading.
Using std::stop_token instead of std::atomic_bool allows the usage of
other utilities like std::stop_callback.
This introduces a new setting Enable FS Access Log which saves the filesystem access log to sdmc:/FsAccessLog.txt
If this setting is not enabled, this will indicate to FS to not call OutputAccessLogToSdCard.
Fixes softlocks during loading in Xenoblade Chronicles 2 when certain DLC is enabled.
* common: fs: fs_types: Create filesystem types
Contains various filesystem types used by the Common::FS library
* common: fs: fs_util: Add std::string to std::u8string conversion utility
* common: fs: path_util: Add utlity functions for paths
Contains various utility functions for getting or manipulating filesystem paths used by the Common::FS library
* common: fs: file: Rewrite the IOFile implementation
* common: fs: Reimplement Common::FS library using std::filesystem
* common: fs: fs_paths: Add fs_paths to replace common_paths
* common: fs: path_util: Add the rest of the path functions
* common: Remove the previous Common::FS implementation
* general: Remove unused fs includes
* string_util: Remove unused function and include
* nvidia_flags: Migrate to the new Common::FS library
* settings: Migrate to the new Common::FS library
* logging: backend: Migrate to the new Common::FS library
* core: Migrate to the new Common::FS library
* perf_stats: Migrate to the new Common::FS library
* reporter: Migrate to the new Common::FS library
* telemetry_session: Migrate to the new Common::FS library
* key_manager: Migrate to the new Common::FS library
* bis_factory: Migrate to the new Common::FS library
* registered_cache: Migrate to the new Common::FS library
* xts_archive: Migrate to the new Common::FS library
* service: acc: Migrate to the new Common::FS library
* applets/profile: Migrate to the new Common::FS library
* applets/web: Migrate to the new Common::FS library
* service: filesystem: Migrate to the new Common::FS library
* loader: Migrate to the new Common::FS library
* gl_shader_disk_cache: Migrate to the new Common::FS library
* nsight_aftermath_tracker: Migrate to the new Common::FS library
* vulkan_library: Migrate to the new Common::FS library
* configure_debug: Migrate to the new Common::FS library
* game_list_worker: Migrate to the new Common::FS library
* config: Migrate to the new Common::FS library
* configure_filesystem: Migrate to the new Common::FS library
* configure_per_game_addons: Migrate to the new Common::FS library
* configure_profile_manager: Migrate to the new Common::FS library
* configure_ui: Migrate to the new Common::FS library
* input_profiles: Migrate to the new Common::FS library
* yuzu_cmd: config: Migrate to the new Common::FS library
* yuzu_cmd: Migrate to the new Common::FS library
* vfs_real: Migrate to the new Common::FS library
* vfs: Migrate to the new Common::FS library
* vfs_libzip: Migrate to the new Common::FS library
* service: bcat: Migrate to the new Common::FS library
* yuzu: main: Migrate to the new Common::FS library
* vfs_real: Delete the contents of an existing file in CreateFile
Current usages of CreateFile expect to delete the contents of an existing file, retain this behavior for now.
* input_profiles: Don't iterate the input profile dir if it does not exist
Silences an error produced in the log if the directory does not exist.
* game_list_worker: Skip parsing file if the returned VfsFile is nullptr
Prevents crashes in GetLoader when the virtual file is nullptr
* common: fs: Validate paths for path length
* service: filesystem: Open the mod load directory as read only
The FPS counter was based on metrics in the nvdisp swapbuffers call. This metric would be accurate if the gpu thread/renderer were synchronous with the nvdisp service, but that's no longer the case.
This commit moves the frame counting responsibility onto the concrete renderers after their frame draw calls. Resulting in more meaningful metrics.
The displayed FPS is now made up of the average framerate between the previous and most recent update, in order to avoid distracting FPS counter updates when framerate is oscillating between close values.
The status bar update frequency was also changed from 2 seconds to 500ms.
SDL 2.0.14 introduces an incompatibility with Clang, causing it to
trigger -Wimplicit-fallthrough even though it is marked. Ignore it for
now, with a comment mentioning why this is needed.
- This is a developer-only setting and no longer needs to be enabled by default.
- Also adds "use_auto_stub" setting to SDL frontend while we are here.
- Supersedes #1340.
Instead of using a two step initialization to report errors, initialize
the GPU renderer and rasterizer on the constructor and report errors
through std::runtime_error.
Setting __GL_SHADER_DISK_CACHE_PATH we can force the cache directory to
be in yuzu's user directory to stop commonly distributed malware from
deleting our driver shader cache. And by setting
__GL_SHADER_DISK_CACHE_SKIP_CLEANUP we can have an unbounded shader
cache size.
This has only been implemented on Windows, mostly because previous tests
didn't seem to work on Linux.
Disable the precompiled cache on Nvidia's driver. There's no need to
hide information the driver already has in its own cache.
This tab of the settings is already extremely bloated and the setting itself is quite useless.
With a gamelist of almost 30 games, the cache directory is smaller than 1MB for me and therefore I don't see why it needs to be configurable.
Specifically:
const auto size = sdl2_config->GetInteger("System", "users_size", 0);
The variable is never used, producing a warning. I wondered if this
ought to be assigning something to in `Settings`, but nothing else in
the codebase ever mentions a setting called "users_size", so I guess
it's safe to remove...
Removes all remaining usages of the global system instance. After this,
migration can begin to migrate to being constructed and managed entirely
by the various frontends.
EmuWindow::PollEvents was called from the GPU thread (or the CPU thread
in sync-GPU mode) when swapping buffers. It had three implementations:
- In GRenderWindow, it didn't actually poll events, just set a flag and
emit a signal to indicate that a frame was displayed.
- In EmuWindow_SDL2_Hide, it did nothing.
- In EmuWindow_SDL2, it did call SDL_PollEvents, but this is wrong
because SDL_PollEvents is supposed to be called on the thread that set
up video - in this case, the main thread, which was sleeping in a
busyloop (regardless of whether sync-GPU was enabled). On macOS this
causes a crash.
To fix this:
- Rename EmuWindow::PollEvents to OnFrameDisplayed, and give it a
default implementation that does nothing.
- In EmuWindow_SDL2, do not override OnFrameDisplayed, but instead have
the main thread call SDL_WaitEvent in a loop.
Allows for enabling and modifying vibration and vibration strength per player.
Also adds a toggle for enabling/disabling accurate vibrations.
Co-authored-by: Its-Rei <kupfel@gmail.com>
This allows setting the vibration strength percentage anywhere from 1% to 100%.
Also hooks up the remaining motion button and checkbox in the Controller Applet.
Unicorn long-since lost most of its use, due to dynarmic gaining support
for handling most instructions. At this point any further issues
encountered should be used to make dynarmic better.
This also allows us to remove our dependency on Python.
Now that the GPU is initialized when video backends are initialized,
it's no longer needed to query components once the game is running: it
can be done when yuzu is booting.
This allows us to pass components between constructors and in the
process remove all Core::System references in the video backend.
